For Flat and Round Material Handling CM Toter Permanent Lift Magnet Permanent magnets operate with the push of a handle. There are no restrictive cords and no power is needed. Models include:
CM400 & CM800 TOTERS For Flat Material Handling The CM is a compact, self-contained, lifting magnet that uses permanent magnets to maintain holding power indefinitely.
NEO-250, 500, 1000 and 2000 For Flat and Round Material Handling The NEO-250, 500, 1000 and 2000 Series material handling magnets are used in steel, supply, machine and die shops where heavy steel objects must be moved quickly and safely.
NEO-HV - For Vertical Handling NEO-HV Vertical Lift Permanent MagnetWalker NEO-HV material lifting magnets are designed ...
For Flat Material Handling Battery magnets use their own power source and can be turned on or off using either I.R. Remote Transmitter or by push button. Models include:
WBM-13, 25, 36 & 50 LOCAL AND CORDLESS REMOTE CONTROLLED Designed for Flat Material Handling, these magnets are compact, mobile, self-contained battery-powered units. Operating on their own power sources, they are free of restrictive cords and wires; they also have the added advantage of being usable in many areas where electricity is not available.
Circular Electric Lift Magnets - For Flat Material Handling Circular Electric Lift MagnetA CER magnet is the least costly but most powerful magnet available. Due to the deep penetration of its magnetic field, it is less susceptible to adverse surface conditions than any other self-contained magnet.
CER5, 7, 9, 12, 16 and 20 Circular Electric Magnets (CER) use a recessed "ON-OFF-Release" switch. A remote option is also available. They feature a Low-carbon steel body for maximum magnetic performance and have a built-in solid state rectifier that permits operation from 115 volt AC outlet.
Electro-Permanent Walker has been designing and manufacturing Electro-Permanent devices since 1960. These magnets utilize permanent magnet material surrounded by an electrically powered coil.
Scrapmaster "D" Series Heavy Lift Magnet SCRAPMASTER® "D" SERIES Cast Case, Deep-Field Aluminum or Copper Coil Designed specifically to fit the needs of scrap processing operations. From a utilitarian 30" to a giant 100", magnet diameters and weights were selected to maximize the lifting capabilities of standard scrap handling cranes. The Scrapmaster® "D" series magnet has a rugged ribbed case, heavy manganese steel bottom plate, welded watertight construction and tough alloy steel chains for maximum durability.
For Flat And Round Material Handling Battery magnets use their own power source and can be turned on or off using either I.R. Remote Transmitter or by push button. Models include:
WBP-7 & WBP-15 B1-POLAR SERIES CORDLESS REMOTE CONTROLLED Designed for Flat, Round and Shaped Material Handling, the special feature of this battery bi-polar magnet is the unique design of the pole shoe, that enables it to handle a wide variety of structural shapes and rounds.
Magnetool Mullilifts provide an effective and rapid means of lifting small iron and steel parts from stock bins, boxes, kegs, tables, or floor. Smooth, uninterrupted side surfaces allow fast, easy burrowing into loose materials. A fingertip pull on the release bar drops the load. The standard units have a nylon lower case. A stainless steel lower case is available for hot or very abrasive material.
(2) There is never a power failure with Magnetool permanent magnet lifts. Because Permanent magnets supply the lifting force, they are always ready to go to work. Never any loss of power. Never need remagnetizing. Not dependent upon outside power source. This safe, permanent magnetic lifting device is lightweight per pound of lifting capacity. Easily portable for use indoors or outdoors. Perfected to handle smooth-surfaced, heavy, solid ferrous blocks. Safe practice in use of magnetic lifts dictates that maximum working load be no more than half the test load. These magnets have been load tested at twice the safe working load shown in table. The M-2000 has a strong aluminum housing one inch thick on all four sides. The cam assembly, bolted to ...
(6) The magnetic field of bi-polar magnets have a greater "reach-out" than that of flat-faced electromagnets. For this reason, they perform better than equivalent flat-face magnets when operating rough an air gap or any type of non-magnetic material between the workpiece and the magnet. Bi-polars, due to their extended poles, are designed to handle round parts, parts with uneven surfaces, and odd shaped parts. Contoured, auxiliary pole shoes can be added for better contact with the workpiece.
